Different applications makes different installation method of LED display.
Normally the installation method would be : fixed installation , rental , stadium , etc.
And different environment also makes different installation method:
wall-mounted, cantilevered, mosaic, Column, standing, roof, mobile, stadium fence type, lease ceiling-mounted arc form other installation, etc.
Six kinds of normal LED display installation
Specific LED display instlaltion method :
1, wall-mounting
1) This installation method is usually used for indoor or semi-outdoor
2) Screen displays a small area, usually without leaving the pit lane space, the entire screen is removed for maintenance, or be folded over one frame
3) Screen area slightly larger, general maintenance before using the design (ie positive maintenance design, usually assembled column mode)
2, Installation on the pole
Installation on the pole, generally used for outdoor advertising use, the following:
1) Single pole Installation: for small-screen applications
2) Double pole Installation: for large screen applications
3) Closed maintenance channel: for simple box
4) to maintain open channels: Standard box
3, cantilevered mounting
1) This mode used for indoor and semi-outdoor
2) generally used for the channel, the entrance hallway, there are bus, train, subway entrance, etc.
3) for road, railway, highway traffic guidance for use
4) Screen design generally use one cabinet design, or lifting structure design
4, suspended installation
This installation method and cantilevered mounting similar applications are the same, the screen body with integrated cabinet design, suitable for indoor, half outdoor screen body
5, mosaic installation
1) The entire display body embedded in the wall, showing the plane at the same level with the wall
2) The simple box design
3) general use before maintenance (front maintenance design)
4) This installation, indoor and outdoor use, but generally applied to small pitch and show the small size of the screen body
5) generally used for building entrance, hall and other buildings
6, standing installation
1) generally use one cabinet design, also took part in formulation combination of design
2) suitable for indoor small dot pitch specification Screen
3) generally show a small area
4) Main Typical applications LED TV design
7, the roof-mounted mode
1) The installation of wind power is a key
2) are generally of a tilt angle of the installation or use of oblique 8 ° modular design
3) used for outdoor advertising display
8, soccer fence installation mode/Perimeter LED display
Circle around the soccer field fence for display advertising
Screen viewing angle can be adjusted with the support frame tilt adjustment
Soft silicone mask design, and the use of soft arc design, in order to avoid collision sports injuries
9, lease hoisting way
Screen size is determined according to the normal screen.
Hoisting not bigger screen. General requirements 6M * 10M or less. Exceptions and special cabinet material Curtain type.
Top with a lifting beam, bottom with bottom beam. Hanging beams for ceiling panel.
Between rows and rows box, with the lifting mechanism is connected between the level of housing means locking tension.
Hoisting mechanism points: gear, cone rod, bolts.
Gear more expensive, beautiful,
Cone rod affordable prices and reliable.
Under bolted cheapest, reliable, relatively cumbersome assembly, dismantling appropriate situation will not be repeated
10 Arc Installation
11, mobile truss installation
1) Screen can move in real time according to the actual needs
2) Screen Mobile division were moving on the display, and site conditions
3) truss design guide
4) Generally used in the stage background screen body, used for television, concerts and other live